The color is natural, the coating is rich in the texture of real stone, it can easily create the decorative beauty of natural stone, and it is the best substitute for natural stone, which meets the JG/T 24-2018 product standard, and is the choice of middle and high-end building quality. Mainly suitable for middle and high-end residential, villas, commercial buildings, office buildings, star hotels, office buildings and other internal walls, external walls, line panels, special modeling.
1, color stability: natural color sand color, no artificial dyeing, no need to worry about fading.
2, wide application: not only the wall, even aluminum plate, glass, also has super adhesion
3, water resistance white: heavy rain washed or soaked not white, can be placed in water immersion test on the spot.
4, strong weather resistance: can adapt to different regional temperature difference, climate environment, excellent quality stability.
5, good anti-fouling :90% of the dirt is difficult to adhere to, after the rain naturally washed, clean as new.
6, long durability: weather resistant emulsion life of more than 10 years.
7, material saving: precise gravel grading, effectively reduce spray waste, saving 10% than the general product.
8, the construction is simple: a molding, more efficient!
Base surface: Remove the dirt, float, uneven surface, and use the special putty for the exterior wall of Junuo to level
Primer: Apply the special primer of Juno real stone paint
Pointing: According to the design requirements of the grid method, measurement, marking, stickers, the part of the grid seam pasted paper
Middle coating: Use a special spray gun to spray 2 lines of Juno natural single color real stone paint main material
Caulking: Remove the paper
Grinding: After drying with 180-mesh sandpaper (optional)
Finishing paint: Apply the special finishing paint with the Jiuno real stone paint
Do not work in wet or cold weather (temperature below 5°C or above 35°C, relative humidity greater than 85%), otherwise the expected painting effect can not be achieved;
During the coating process, the coating interval should be strictly controlled, and the next coating can only be carried out after the recoating time is reached. Too short recoating time will cause the underlying paint film to dry slowly, wrinkling, foaming, water resistance and poor adhesion problems.
1, please always wear protective equipment during use; In case of eye contamination, rinse immediately with plenty of water and seek medical assistance.
2. Please do not allow children or pets to enter the construction area, and place the product out of reach of children;
3, when the product spilled leakage, with sand or soil cover after collection and reasonable disposal, do not pour the product into the sewer or drainage pipe;
4, disposal of waste should comply with local environmental standards.
