Water based fluorocarbon paint is an environmentally friendly single component coating composed of high-performance water-based fluorocarbon resin, which has excellent durability, ease of application and cleaning, as well as long-term excellent light and color retention properties. It has a variety of standard colors, varnishes, semi-finished water-based fluorocarbon coating color matching systems, and can also meet customers' personalized color matching requirements. Suitable for ultra durable decorative protective coatings on various building exteriors, bridges, dams, tunnels, steel structures, aluminum profiles, roofs, and various building materials.
1. Strong durability: Water based fluorocarbon coatings have excellent outdoor weather resistance. The ultra-high bond energy of C-F bonds endows coatings with strong chemical stability, resulting in excellent resistance to UV degradation and super weather resistance.
2. Stain resistance: Due to the dense molecular structure of water-based fluorocarbon coatings, the coating is hard and has low surface energy. At the same time, the induced voltage on the surface of the paint film is high (high resistivity) and it is not easy to cause static electricity, making it highly anti fouling and hydrophobic.
3. The dense coating of water-based fluorocarbon coating has a smooth hand feel, and surface attachments can be washed with clean water or wiped clean with a diluent.
4. The water-based fluorocarbon coating formulated with fluororesin has excellent chemical resistance and corrosion resistance after crosslinking and curing.
5. After 2000 hours of salt spray test, the water-based fluorocarbon coating showed no change in the paint film. This product also has excellent mold resistance and flame retardancy, making it well suited for humid and foggy climates as well as coastal environments.
1. Base treatment: Remove dirt, floating dust, and unevenness from the base surface, and level it with Jiunuo exterior wall special putty
2. Putty scraping: Jiunuo's dedicated leveling putty is used for leveling and jointing
3. Line separation: The ink fountain pops up the dividing line and uses decorative paper to stick out the dividing line
4. Primer: Apply the matching Jiunuo water-based fluorocarbon paint special primer, seal alkali, waterproof
5. Jointing paint: apply water-based fluorocarbon jointing paint
6. Middle layer paint: apply Jiunuo water-based fluorocarbon paint middle layer paint
7. Topcoat: Apply 2 coats of Nuoshui fluorocarbon paint
Do not apply in humid or cold weather (temperature below 5 ° C or above 35 ° C, relative humidity greater than 85%), otherwise the expected coating effect cannot be achieved;
During the painting process, it is necessary to strictly control the painting interval. The next painting can only be carried out after reaching the recoating time. A too short recoating time can cause slow drying of the underlying paint film, resulting in wrinkles, bubbles, poor water resistance, and adhesion.
1. Please always wear protective equipment during use; If accidentally stained with eyes, please rinse immediately with plenty of water and seek medical assistance;
2. Please do not allow children or pets to enter the construction area and keep the product out of reach of children;
3. When the product spills and leaks, cover it with sand or soil, collect and dispose of it properly, and do not pour the product into the sewer or drainage pipe;
4. Waste disposal should comply with local environmental standards.
